XR150 kickstart install tips

Hi, for installation PLEASE watch the following video . in addition to this video, you need to install. DO NOT install the c clip on the intermediate shaft, as the usa bikes have no groove for the clip

1 large steel washer, below the kickstart shaft spring

2 small spacers between the primary shaft bearing and sleeve, BELOW the clutch basket

install low profile bearing in the clutch pressure plate

AFTER the install do a oil change, clean the screen and spinner at 150 miles

FAILURE to do any of the following can result in damage, sss is not liable for any issues that may occur due to incorrect installation, and failure to follow these instructions.