Honda Grom 2022-2027 frame reinforcement kit

MADE IN USA

** FRAME NOT INCLUDED - FOR VISUAL ILLUSTRATION / DISPLAY ONLY ** 

Grom 2022-2027 frame reinforcement kits are here! These are a weld in part, we recommend only installing these on a fresh bike, or on a new frame! This is not recommended to be used as a "band-aid" fix for a cracked, bent, or broken frame. 

The full kit adds 3.62LB to your bike's weight, it is not super heavy.  

This kit is similar and different from our kit for the '14-'20 grom. 

1.  The top tube reinforcement kit includes SIX (6) pieces, to fully box in the "chinbone" part of the frame that can twist, crack, and break. A couple (4) hose holder brackets will need to be cut off, and welded back on - two of them have holes cut out where they will need to be welded back on, the other two do not, as we didn't want to compromise the rigidity of the reinforcement plate. 
2.  The lower mounts are nearly identical to our design for the older groms. This five (5) piece kit will reinforce the rear motor mounts, and our provided gussets will reinforce the rear set mounting posts from bending or shearing off. No cutting is required to install these components.
3. The upper reinforcement kit is new for this version of the kit, it includes four (4) pieces and addresses the upper subframe mount, and uses two bent pieces and two smaller cut out parts to really reinforce this mount, to avoid cracking or shearing off during scrapes, crashes, or loops while you are doing stunts. We chose not to reinforce the subframe, as we don't want to put any more stress on the mainframe if at all possible (it is cheaper to replace the subframe, trust me!) please note!   It is necessary to install the tip over sensor BEFORE installing the reinforcement plates! It will be nearly impossible to remove or install once the plates are installed!